Home » Shop » Mercedes-Benz » Mercedes-Benz Sprinter Van 2007 – 2021 (906)

Mercedes-Benz Sprinter Van 2007 – 2021 (906)

Jenok refillable aero wiper blades for your Mercedes-Benz Sprinter Van 2007 – current (906). Comes with two blades and two spare refills, keeping your windscreen cleaner for longer for less.

$59
2x Blades
2x Free Refills
Free Delivery
Buy Now

Find the wiper blades for your car!

Can't find your wiper blade?

Description

Australian made aero wiper blades, refillable front pairs, Trusted by 1000’s of Mechanics. For Mercedes-Benz Sprinter. Specs : Driver 26″ / 650mm: Passenger Side 24″ / 600mm, Adapter: A2N

You will receive a drivers and passenger side refillable Jenok aero wiper blades plus two free refills.

Adapter

Body Type

Drivers Side

Maker

Model

Passenger Side

Rear Wiper Blade

Year


Removing your old wipers

A2-type adaptor and arm
A2-type wiper arm
Removing A2 type wipers1
Removing A2 type wipers 2

Replacing your adaptor

Replacing A2 type wipers 1
Replacing A2 type wipers 2
Replacing A2 type wipers 3

These Jenok wiper blades are suitable for

To check if you have selected the correct wiper blades for your car, following the installation instructions below to remove the old, worn out and tired wiper blades you currently have and see if your wiper arm end matches the one shown here.

Wiper Blade Arm Type A2N

How to install your Jenok wiperblades

  1. Lift up the old wiper blade.
  2. Rotate wiper blade 90°
  3. Press the tab on the wiper blade connector to release it from the wiper arm.
  4. Slide the old wiper blade off the wiper arm.
  5. Get the new wiper and place the wiper arm into the connector.
  6. Push the wiper blade up until it clicks into the wiper arm.
  7. Done!

*For further details please check your car owners manual

How to replace your wiper rubbers with your free refills

  1. Pull the rubber blade back to approx 3cm
  2. Pull the rubber out through the slot on the underside
  3. Insert new rubber through the same slot
  4. Slide the rubber refill along the entire length of the blade until you reach the end
  5. Get the new wiper and place the wiper arm into the connector.
  6. At the end you inserted the refill, slide the refill down past the slot that you insert it into, then slide the remained back to the end
  7. Done!
Wiper Blade Refil Instructions
Wiper Blade Refil Instructions